Home News Company Products Certificate Exhibition Download Distributor Contact us
 
 
  Products
 
 
Battery Series
Digital Li-ion Camera Battery  
D Series MINI Li-ion Battery  
DM Series MINI Li-ion Battery  
DN Series High Load Battery  
DS Series High Load Battery  
DS Built-in Charger Battery  
26V Li-ion Cine Battery  
DS Series Battery Pack  
SONY Camera DV Battery  
Panasonic Camera DV Battery  
Canon Camera DV Battery  
JVC Camera DV Battery  
V-Mount/Gold Mount Charger
2-Channel Charger/Adaptor  
4-Channel Charger  
10-Channel Charger  
Travel Charger  
DV Charger
Single DV Charger  
2-Channel DV Charger  
4-Channel DV Charger  
Wireless system
DW-500B SDI/HDMI 150m Wireless  
DW-2000 SDI/HDMI 700m Wireless  
DWV-2000 SDI/HDMI 700 Wireless  
Wireless Panel Antenna  
Camera Accessory
Mount  
Adapter Cables  
Shoulder Rig  
LED Panel Light
EL-500 Series LED Panel Light  
EL 1x1 Series LED Panel Light  
ELF2 Series LED Panel Light  
ELF3 Series LED Panel Light  
LED Fresnel Spotlight
D-LFS100 Series(100W)  
D-LFS200 Series(200W)  
Battery Extender
24V Power Adapter  
48V Skypanel Power Adapter  
 
 
Homepage > Products
 
Mount
 
 
D-TS
The D-TS is a Universal Hot-Swap battery mount, it allow the user to hot swap a fresh battery while still operating equipment, so you can remove the depleted battery while the leaving the other battery connected so that there is no down time.
Utilizing the battery-mounting system, it can be attached to any portable device with an existing battery bracket.
 
 
 
D-TA
The D-TA is a Universal Hot-Swap battery mount, it allow the user to hot swap a fresh battery while still operating equipment, so you can remove the depleted battery while the leaving the other battery connected so that there is no down time.
Utilizing the battery-mounting system, it can be attached to any portable device with an existing battery bracket.
 
 
 
D-URSA Mount
To mount Dynacore D-URSA to the real panel:
1. Remove Blackmagic URSA Broadcast¡¯s molex power cover if attached to the real panelby unscrewing the 4 corner screws with a Phillips head PH1 screwdriver. You¡¯ll now see  Blackmagic URSA Broadcast¡¯s 12 way molex 55959-1230 power connector.
2. Connect Dynacore D-URSA¡¯s molex connector to the 12 way molex 55959-1230 power connector.
3. Screw Dynacore D-URSA onto your Blackmagic URSA Broadcast¡¯s plate mounting points using 4xM3 screws. Make sure the connector cable is tucked safely into the cable slot and not crushed between the plates when tightening.
With Dynacore D-URSA connected to your camera, you can now mount a V-mount battery.
Net Weight:Approx 0.16Kg
Dimension:142.6x92x21mm
 
 
 
D-S Mount
Compatible with professional cameras to use V-lock mount battery pack.
 
 
 
D-3SC/4SC Mount
To meet the keep changing market demands for film lightings, Dynacore has launched 3 series power supply system by continuous R&D and design, they are D-SC, D-3SC&D-4SC.
D-SC, fixed to the lighting stand with C-clamp on the back, it provides power to the 12-24V film lightings through the D-tap connector on the mount plate, which is connected by the adapter cables like Dynacore D-B, D-BS, D-BK, etc. It supports 220W output to the max.
D-3SC, fixed to the lighting stand with C-clamp on the back and equipped with 3 pin XLR output. Mounted with Dynacore DHB-200(26V professional camera battery), it can provide power to lighting systems which requires DC IN 18-28V like KINO FLO Lighting systems, etc.  
It supports 780W output to the max.D-4SC, fixed to the lighting stand with C-clamp and equipped with 4 pin XLR output. Mounted with Dynacore DHB-200(26V professional camera battery), it can provide power to lighting systems like ARRI Skypanel, etc.  
It supports 780W output to the max.
 
 
 
D-SC Mount
To meet the keep changing market demands for film lightings, Dynacore has launched 3 series power supply system by continuous R&D and design, they are D-SC, D-3SC&D-4SC.
D-SC, fixed to the lighting stand with C-clamp on the back, it provides power to the 12-24V film lightings through the D-tap connector on the mount plate, which is connected by the adapter cables like Dynacore D-B, D-BS, D-BK, etc. It supports 220W output to the max.
D-3SC, fixed to the lighting stand with C-clamp on the back and equipped with 3 pin XLR output. Mounted with Dynacore DHB-200(26V professional camera battery), it can provide power to lighting systems which requires DC IN 18-28V like KINO FLO Lighting systems, etc.  
It supports 780W output to the max.D-4SC, fixed to the lighting stand with C-clamp and equipped with 4 pin XLR output. Mounted with Dynacore DHB-200(26V professional camera battery), it can provide power to lighting systems like ARRI Skypanel, etc.  
It supports 780W output to the max.
 
 
 
D-C(V-Mount) Mount
Multi-output adapter designed for DSLR cameras, such as Canon 5D Mark II and 7D, etc.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount/Gold Mount ENG batteries are required for the power, Dynacore DS-89S/A (95Wh) to DS-260S/A (260Wh) batteries are recommended.
 
 
 
D-C(Gold Mount) Mount
Multi-output adapter designed for DSLR cameras, such as Canon 5D Mark II and 7D, etc.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount/Gold Mount ENG batteries are required for the power, Dynacore DS-89S/A (95Wh) to DS-260S/A (260Wh) batteries are recommended.
 
 
 
D-SA
It may convert the V-plate to Gold Mount bracket. It offers a solution to allow the use of Gold Mount batteries on V-Mount cameras.
It can also be used as a charge adapter, enabling you to charge Gold Mount batteries on V-lock chargers.
1. Lock Gold Mount battery to the Gold Mount side of the D-SA, then the battery converts into V-Mount.
2. Lock V-Mount side of D-SA with camera, then the battery ready to work.
 
 
 
D-AS
It may convert the Gold Plate to V-Lock bracket. It offers a solution to allow the use of V-lock batteries on Gold mount cameras. It can also be used as a charge adapter, enabling you to charge V-lock batteries on Gold mount chargers.
1. Lock V-Mount battery to the V mount side of the D-AS, then the battery converts into AB mount. Please see the illustration for the conversion.
2. Lock Gold Mount side of D-AS with camera, then the battery ready to work.
 
 
 
D-F/U DV Battery Mount
Dynacore unique design DV Battery Mount is compatible with SONY U60/U30, SONY F970 and Panasonic D54S series battery. The Mount can supply power to external equipments with DV battery, convenient and reliable.
F:SONY DV Battery (SONY NP-F550/770/970)
U:SONY DV Battery (SONY BP-U60/30)
 
 
 
D-A Mount (Gold Mount)
Compatible with professional cameras to use Gold Mount battery pack.
 
 
 
   
 
  Copyright @ 2008 Nanjing Dynacore Technology Co.,Ltd Dynacore-battery.com